XT-4K-VIP-TX 4K UHD Video Over IP Transmitter

Brand: Xantech Part Number #24066 SKU: XT-4K-VIP-TX Categories: ,
Free Shipping $200+30D Money Back1Y Limited WarrantyContact

Xantech XT-4K-VIP-TX

4K Video Over IP Transmitter with Audio Breakout and Independent Signal Routing over 1Gb Network

The Xantech Premium Video over IP (VIP) platform enables distribution of HDMI video over a 1Gb Network switch. The XT-4K-VIP-TX and XT-4K-VIP-RX are HDCP 2.2 compliant Transmitters and Receivers that use visually lossless compression technology to deliver HDMI, Bi-directional IR, RS-232 and USB/KVM up to lengths of 100m over standard network architecture. The XT-4K-VIP-TX/RX can be powered via PoE from a Network switch or powered locally should a switch either not be used or not support PoE. With multiple configuration options available, this Video over IP solution
is ideal for both commercial and residential installations.

Xantech XT-4K-VIP-TX

Features at a Glance

  • Advanced UHD video over 1Gb Network
  • Virtually unlimited system size
  • Connect to any supported Layer 2 / Layer 3 Managed Switch for HDMI video distribution
  • Supports up to 4K HDR UHD video (3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 24Hz 4:4:4, and 4K @ 60Hz4:2:0)

 

NOTE: HDR support is dependant on video signal bandwidth. Please see table in product manual for reference.

  • Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
  • Video up-scaling and down-scaling
  • Features 4 operational modes:
    • Matrix distribution (Requires 1Gb network switch)
    • Video wall (Requires 1Gb network switch)
    • One-to-one HDMI extender (No network switch required)
    • One-to-many HDMI splitter (No network switch required)
  • HDCP 2.2 Compliant
  • Advanced EDID management
  • Analog L/R audio embedding and de-embedding on XT-4K-VIP-TX Transmitter
  • Analog L/R audio breakout on XT-4K-VIP-RX Receiver
  • Bi-directional RS-232 and IR pass through
  • USB 2.0 connectivity (backwards compatible with USB 1.1) for KVM and other USB devices
  • PoE (Power over Ethernet) to power Xantech products from PoE switch
  • Local 24V 1A power input should network switch not support PoE, sold separately
  • Simple configuration via web-GUI through the XT-4K-VIP-ACM
  • HDMI audio embedding supports up to 192 Khz, XT-4K-VIP-RX analog audio output supports up to 96Khz only
  • RS-232, IR and Telnet/IP integration for control of the VoIP system using Xantech XT-4K-VIP-ACM

Xantech XT-4K-VIP-TX 

Specifications

Shipping Info
  • Length 10 (Inches)
  • Width 6.4 (Inches)
  • Height 2.1 (Inches)
  • Weight-1.75 (Lbs)
Other Specifications
  • Video input1 x HDMI Type A, female
  • Audio input1 x 3.5mm L/R analog audio
  • Audio output2 x RCA L/R analog audio
  • Video output/Ethernet port1 x LAN RJ45 connector (PoE 9W)
  • USB / KVM1 x USB, Type B
  • RS-232 serial port1 x 3-pin Phoenix connector
  • IR input1 x 3.5mm stereo jack
  • IR flasher1 x 3.5mm mono jack
  • Firmware update1 x USB Micro B
  • AccessoriesMounting kit included
  • Dimensions (W x D x H )190mm x 114mm x 25mm
  • Shipping Weight (Kit)0.8kg
  • Operating temperature32°F to 104°F (0°C to 40°C)
  • Storage temperature-4°F to 140°F (-20°C to 60°C)
Weight 1.75 lbs

Our products can be returned within 30 days of the original purchase of the product. A new product may be exchanged for another product or returned for a refund.
To be eligible for a return, please make sure that:
-The product was purchased in the last 30 days
-The product is in its original packaging
-The product is not used or damaged
-You have the receipt or proof of purchase
-You obtained a Return Merchandise Number (RMN) from us
Products that do not meet these criteria will not be considered for return.
Read Full Returns and Refunds Policy

Reviews

Votes:
5
4
3
2
1

There are no reviews yet.

Be the first to review “XT-4K-VIP-TX 4K UHD Video Over IP Transmitter”