1×10 Component Video-Audio Distribution Amplifier

1×10 Component Video-Audio Distribution Amplifier

Login For Price

SKU: K-1112 Category:

  • Description
  • Downloads
  • Additional information
  • Reviews (0)

Description

Specification

Video:

Gain:

  • 2 Volt Unterminated
  • 1 Volt terminated:75 ohms 5%
  • Input Impedance: 75 ohms 5%
  • Output Impedance: 75 ohms 5%
  • Video Insertion loss: 50 Hz to 10 MHz < 1 dB limited
  • In to Out Isolation: 50 Hz to 10 MHz 32db port to port
  • Out to In Isolation: 50Hz to 10 MHz 60 dB
  • Return loss: 50 Hz to 10 MHz 20dB
  • Video Band Width: >40 MHz

Audio

  • Gain: Unity
  • Input Impedance: 47k ohms
  • Output Impedance: 1k ohms
  • THD: 0.05% @ 1.0 volt input level
  • Frequency REsponse: 20 Hz to 100 kHz
  • Channel Separation: >75dB @ 1 kHz
  • In to Out Isolation: 60dB
  • Out to In Isolation: 60dB
  • Signal to Noise: 100dB @ 2 volts (out)
  • A/V Input/Output Jacks: RCA type photo Jacks

Power:

  • Requirements: 12 Volt DC @ 500mA with 2mm power jack

Key Information:

Any TV used must have the same application as your Audio/Video Source. (Y, Cb, Cr and Y, Pb, Pr)

Safety Instructions:

  • Location: Avoid locations with strong vibration, direct sunglight or intense heat.
  • Avoid Electrical Shock: Do not handle power cord with wet hands, do not expose to rain or other moisture. If liquid  is spilled on unit, unplug and have unit serviced at authorized services center. To reduce the risk of electrical shock, do not remove cover, no user-serviceable parts inside.

 

Additional information

Weight 3.80 lbs

Reviews

There are no reviews yet.


Be the first to review “1×10 Component Video-Audio Distribution Amplifier”

X

X